DPDT Relay

DPDT Relay

DPDT Relay Features of Electrical Relay ●Low height: 15.7mm ●16A switching capability ●5kV dielectric strength (between coil and contacts) ●Creepage distance: 10mm ●Meeting VDE 0700, 0631 reinforce insulation ●Product in accordance to IEEC 60335-1 available ●Socket available ●Plastic sealed and...
Chat Now

Product Details

DPDT Relay

Features of Electrical Relay

●Low height: 15.7mm

●16A switching capability

●5kV dielectric strength (between coil and contacts)

●Creepage distance: 10mm

●Meeting VDE 0700, 0631 reinforce insulation

●Product in accordance to IEEC 60335-1 available

●Socket available

●Plastic sealed and flux proofed types available

●UL insulation system: Class F available

●Outline Dimensions:(29.0 x 12.7 x 15.7)mm

●Environmental friendly product(Rohs Compliant)

Contact Data of Automotive Relay

Contact arrangement

1A,1B,1C

2A,2B,2C

Contact Resistance

100 mΩ max.(at 1A  6VDC)

Contact Rating(Res.load)

12A/16A 250VAC

8A 250VAC

Max. switching voltage

440VAC/30VDC

Max. switching current

12A/16A

8A

Max. switching power

3000VA/4000VA

2000VA

Mechanical Endurance

1 x 107OPS

Electrical Endurance

1H3B type:1 x 105OPS

2H4B type:5 x 104OPS

Contact Material

See ordering information

Characteristics of Normally Closed Relay

Insulation Resistance

1000 mΩ(at 500VDC)

Dielectric Strength

Between coil & contacts

5000VAC 1min

Between open contacts

1000VAC 1min

Between contact sets

2500 VAC 1min

Vibration resistance

10Hz to 150Hz 10g/5g

Operate Time(at nomi. volt.)

15ms max.

Release Time(at nomi. volt.)

8ms max.

Shock Resistance

Functional

98m/s2

Destructive

980m/s2

Humidity

5% to 85% RH

Ambient Temperature

-40℃ to 85℃

Termination

PCB

Unit Weight

Approx.13.5g

Construction

Plastic sealed,flux proofed

Ordering Information of Spst Relay

HF115F Ordering Information(001).jpg 

Outline Dimension ,Wiring Diagram and PCB Layout of 8 Pin Relay

HF115F OUTLINE DIMENSION(001).jpg

HF115F Wiring diagram(001).jpg

HF115F PCB LAYOUT(001).jpg

Notice:

1. In case of no tolerance shown in outline dimension: outline dimension≤1mm, tolerance should be ±0.2mm; outline dimension>1mm and ≤ 5mm,tolerance should be ±0.3mm; outline dimension >5mm,tolerance should be ±0.4mm .

2. The tolerance without indicating for PCB layout is always  ±0.1mm.

3. The width of the gridding is 2.54mm.



Inquiry