Signal Relay DPDT

Signal Relay DPDT

Signal Relay DPDT Features of Electronic Signal Relay ●High sensitive: 150mW ●Matching standard 16 pin IC socket ●High switching capacity: 120VA / 90W ●Bifurcated contacts ●Epoxy sealed for automatic-wave soldering and cleaning ●Single side stable and latching type available. ●Outline...
Chat Now

Product Details

Signal Relay DPDT

Features of Electronic Signal Relay

●High sensitive: 150mW

●Matching standard 16 pin IC socket

●High switching capacity: 120VA / 90W

●Bifurcated contacts

●Epoxy sealed for automatic-wave soldering and cleaning

●Single side stable and latching type available.

●Outline Dimensions:(20.2x 10.2 x 10.6)mm

●Environmental friendly product(Rohs Compliant)

Contact Data of Signal Light Relay

Contact arrangement

2C

Contact Resistance

100 mΩ max.(at 10mA  30mVDC)

Contact Rating(Res.load)

1A 125VAC/, 2A /30VDC, 3A /30VDC

Max. switching voltage

250VAC/220VDC

Max. switching current

3A

Max. switching power

125VA/90W

Mechanical Endurance

1 x 108OPS

Electrical Endurance

5 x 104OPS

Contact Material

See ordering information

Characteristics of Flasher Relay for LED Light

Insulation Resistance

1000 mΩ(at 500VDC)

Dielectric Strength

Between coil & contacts

1 coil:1500VAC 1min

2 coil:1000VAC 1min

Between open contacts

1000VAC 1min

Vibration resistance

10Hz to 55Hz 1.5mm DA

Operate Time(at nomi. volt.)

4.5ms max.

Release Time(at nomi. volt.)

3.5ms max.

Shock Resistance

Functional

490m/s2

Destructive

980m/s2

Humidity

5% to 85% RH

Ambient Temperature

-40℃ to 85℃

Termination

PCB(DIP)

Unit Weight

Approx.4.5g

Construction

Plastic sealed

Ordering Information of Blinker Relay

HFD2 ORDERING INFORMATION(001).jpg 

Notes: 1) 48VDC coil voltage is only for single side stable & stabdard type.

           2) Not for new design.

           3) The customer special requirement express as special code after evaluating by Hongfa.

Outline Dimension ,Wiring Diagram and Wiring Diagram of Led Blinker Relay

HFD2 OUTLINE Dimension(001).jpg 

HFD27 Wiring Diagram(001).jpg

Notice:

1. In case of no tolerance shown in outline dimension: outline dimension≤1mm, tolerance should be ±0.2mm; outline dimension>1mm and ≤ 5mm,tolerance should be ±0.3mm; outline dimension >5mm,tolerance should be ±0.4mm .

2. The tolerance without indicating for PCB layout is always  ±0.1mm.

3. The width of the gridding is 2.54mm.


Inquiry